Stripping In Car

with fusion parts? :

If you strip a with fusion parts - those parts are lost and you receive no more than a base without fusion parts. Edit to add

Automotive -The Complete PRO/ CONS Guide -

Chemical Strip Procedure · Best to scratch surface with 80 Grit Sandpaper · Cover seams or gaps with tape · Pour chemical

What is CSR 2? When to strip and why. : r

PS. If you strip a Tier 1 you will only get fusions and T1 don't have S6 parts for it. + T1 won

Is a out illegal | Driftworks Forum

As I you have gathered, no it's not illegal. My e28 had just a gauge cluster for an and the column controls like

before Thoughts? :

Twice I've stripped a with zero upgrades and received three s6 parts and of the four I upgraded to s5 before only one of them

How much will it cost to strip a | AnandTech Forums

If you don't about the parts, then it would take a lot less. IMO, you are much better off it yourself; with the money saved

FAQ - "Do I need to strip wash my before -

No. Its not required, but does result a dramatically easier detail by remove or degrade on the If you choose

a by oven Northeast ?

Be sure that the company you has a Controlled Pyrolysis Oven so that temperature can't exceed 800 degF and that the atmosphere is and

Project Spec E46: and a - NASA Speed

The model needs to be a 330i or 330ci, but you can use 323, 325 or 328 variants, but you have to update it to be a 330i. You should look for a

without the Overcoat) - Team-BHP

Overcoat can be done easily without Keep 1500-2000 per panel/piece on size. 20k is a decent budget if the body is good